Install motherboard

Before we can put the motherboard in the case, we have to attach the "securing screws" to the case as shown below. The motherboard is resting on 6 of these "securing screws" and looks like the one that you can se in the picture to the right..

Type of screws to use.

Pass på at festene stemmer overens med hullene i hovedkortet.

The screw you see on the picture above is used to attach the motherboard to the case. You will find these screws in the small bag you found when you opened the case. The circles in green show you where to put the screws.

Video - installation motherboard

Put the motherboard carefully down into the case and push it sideways, so that ports and outlets come outside on the backside of the case.

Next - Connect power outlets to the motherboard