|
|
Install the harddrive
In the picture above, we can see a hard drive from behind. The rear end of the hard drive has a jumper (a small plastic piece, marked in green in the picture. The placement of this jumper will have an influence on how the hard drive will work. There are two main settings, "master" and "slave". Which is which is usually written on top of the hard drive. If you have two hard drives, the one with the operative system (Windows XP), needs to be in "master" and the other one in "slave"
Video - Installation harddrive
The hard drive shall be placed at the bottom level in the first row. Let it slide in until you see the holes on the side. Use the small screws, like the one in the picture below. We think that two screws is enough in order for it to be steady, but you can also use four.
|
